Onboarding Guide for Active Customers
Why do I not see stringing option for my selected Inverter?
You may not see the stringing option as it will be enabled under the following conditions: 1. Project Type The project must be a new residential project. For commercial and old projects , you might be unable to locate stringing option. 2. Panel Data ...
Introduction to Stringing and how to Model Stringing on Enact Platform
Enact Solar’s platform now includes Stringing for Inverters, letting designers group solar panels into strings (series or parallel sets) that correctly match an inverter’s voltage & current specs. This feature helps ensure optimal performance: ...
What is Inverter Stringing and why is it important?
What is Stringing in Solar? In a solar PV system, stringing means connecting multiple solar panels together in series or parallel to form a "string" that matches the voltage and current requirements of the inverter. Think of it like connecting ...
Installer Design App Shading Tool Now Approved for Use in NYSERDA’s NY-Sun Program
We are pleased to announce that the Enact Installer Design Shading Tool is now approved by NYSERDA for use in project applications under the NY-Sun program. Participating Contractors, effective immediately, can begin using the Installer Design App ...
Palmetto LightReach Integration with Enact: Setup, Activation & Design Workflow
Enact has partnered with Palmetto LightReach to offer seamless integration of financing options directly within the Enact solar design platform. This guide walks you through the full process—starting from initial activation, to applying Palmetto ...
How to View Annual Shade Values in the Design Tool
When working with solar designs, understanding shade impact is critical. The Design tool provides a helpful way to visualize Annual Shade Values in two easy-to-understand formats: 1. By Color The Annual Shade values are color-coded directly on the ...
How to create a design for a site under construction / new construction?
Creating a solar design for an under-construction site involves unique challenges, such as incomplete structures, evolving site plans, and limited access. However, with a structured approach, it can be done effectively. For creating a design for an ...
How to place panels using Single Panel option
To place panels using the Single Panel feature, follow these steps: Go to the Panel Layout section in your design workspace. Select the “Single Panel” option from the toolbar. Move your cursor over the roof area where you’d like to place a panel. As ...
How to add 3D view video link of the site to your proposal template , using Loom
Here is a Step-ny-Step Guide on howto add a site 3D view video link to your proposal template: 1. Navigate to eidt tab of respective site. 2. Once on the design page, click on 3D view. 3. Record a short video of the 3D view using loom.com 4. Now, on ...
How to Align Solar Panels to a particular Edge
To align panels to the edge while designing a solar system: Select the roof area where the panels have been placed. Again click on / select the specific side or edge where you want the panels to be aligned. When you select the desired edge , you will ...
How to Generate a Proposal as a Contract
For sending a proposal as a contract, first , navigate to the Project's Finance page Publish the desired Proposal Contract Next , make sure that Contract Generation feature (as below) for your account is activated and if not , please ask our Customer ...
Applying Reverse Tilt to Solar Panels
Summary This article explains how to use the Reverse Tilt to optimize panel placement on roofs with less ideal orientations. You will learn how to apply reverse tilt and adjust panels to prevent shading issues. Adding tilt to the solar panel To place ...
How to Upload Image and Add Panels / Inverters / Storage
You can upload an image by following these steps: Navigate to the Design Tool Click on the "Gear" Icon on the down right hand side of design page. Toggle to the "Change" option. A dialogue box will then pop up , select "Upload Image" & press confirm. ...
How do I delete Panel/s using Multiselect option to efficiently manage arrays?
To delete a group of panels using Multiselect option , please follow below steps: 1. Navigate to the Design Tool. 2. Expand the Panel Layout tab. 3. Highlight / Activate the "Multiselect" option. 4. Navigate to the desired array & click and drag on ...
Introducing Structures for Panels in Enact
How to add Structures for Panels Add Panels on the Roof: Start by placing solar panels onto the desired rooftop area. Access Panel Properties: Click on "Show More" under the panel properties section. Add Frame Height: Enter the frame height to ...
How Enact Adjusts Dimensions for Tilted Roofs: From 2D to Reality
When designing a tilted roof in Enact, the initial dimensions are drawn in a 2D plane. However, as the user marks key points, the system intelligently detects the roof’s tilt and automatically adjusts the dimensions to reflect the true 3D ...
How do I delete a Project/s ?
To delete a Project/s , go to the Projects tab & click click anywhere on the Project name row. Once the desired project gets selected , a bin icon will appear on the top right and you can delete the project thereon. Similarly , to click more than one ...
On the design page , how to I switch to 3D Mode?
For switching to 3D mode , simple click on the "3D" tab on the top right corner of design page. A video reference is attached as below.
How can I draw the Roof Outline?
Once you located the property or desired system location, you can scroll to the location with your mouse by clicking and dragging outside of the highlighted area. On the left , click on “Free Form” under “Roof” to begin drawing the outline of roof. ...
What is Kilowatt Offset & how can I view them?
Kilowatt offset refers to the portion of your energy consumption that is replaced or offset by the electricity generated from your solar power system. It's essentially the amount of grid energy you no longer need to purchase because your solar panels ...
Adjust Inter-row spacing in a design
Inter-row spacing in solar design refers to the distance between rows of solar panels in a ground-mounted or roof-mounted system. Proper inter-row spacing is essential to avoid shading between rows, maximise energy production, and ensure efficient ...
How to create Ground Mount designs?
Ground mount solar designs refer to solar photovoltaic (PV) systems that are installed on the ground rather than on a building’s roof. These systems use specialized mounting structures to secure the solar panels at an optimal angle and orientation to ...
Describe Proposal Solar Distribution Graph
Proposed solar distribution in solar design refers to the planned allocation and placement of solar panels and their energy output within a solar power system. This includes how the generated solar energy will be used, stored, or exported. Key ...
Describe Load Analysis Graph
A load analysis graph in solar design is a visual representation of a building's energy consumption over a specific period. It helps in understanding the energy demand patterns and is crucial for designing an efficient solar power system. Here are ...
How do I upload custom generation file
Generation data for solar PV (photovoltaic) design refers to detailed information about the amount of electricity generated by a solar power system over a specific period. This data is crucial for evaluating the performance and efficiency of the ...
How can I download DXF file for the design?
Rohit Maurya 7 hours ago Updated FollowNot yet followed by anyone In the context of solar design, a DXF (Drawing Exchange Format) file is a type of CAD (Computer-Aided Design) file that is used to share and transfer design data between different ...
Understanding Changes in excess solar compensation logic (Italy and Germany)
Rohit Maurya 2 months ago Updated FollowNot yet followed by anyone The excess solar compensation logic for customers in Italy and Germany is being updated to better reflect the management of surplus electricity, which is handled through incentives ...
Create a Lease Option in Finance Setup
Rohit Maurya 2 months ago Updated FollowNot yet followed by anyone In this article, we'll explore how you can create a lease option for solar, including key components such as the price per kilowatt-hour ($/kWh), annual escalator, and lease term. Go ...
How to adjust the Frame & Clamp space in the design?
Rohit Maurya 1 month ago Updated FollowNot yet followed by anyone Please see the video on how to adjust the Frame and Clamp space Frame Space: Frame space, refers to the gap or clearance between adjacent solar panel frames when multiple panels are ...
How can you integrate modules into tables and frames for your system design?
Rohit Maurya 1 month ago Updated FollowNot yet followed by anyone Please refer to the video for guidance on constructing designs using a range of tables and frames Tables: In the context of solar structures, "tables" may refer to the array or rows of ...
Essential Shortcut keys & guides for Design Page
Rohit Maurya 21 days ago Updated FollowNot yet followed by anyone Introduction: Welcome to the Enact Design Platform! We understand that mastering shortcuts can significantly enhance your workflow efficiency. In this guide, we'll introduce you to ...
What are System Losses and why are they important?
Rohit Maurya 4 months ago Updated FollowNot yet followed by anyone System losses are an important factor when estimating solar system generation. Typical Categories of Losses: Irradiance Based Losses: Tilt, Azimuth, Shading, Soiling, Snow Loads, ...
How to select & adjust the Post Solar Utility rate, Utility escalation & System Losses
Rohit Maurya 4 months ago Updated FollowNot yet followed by anyone Please click on Energy under the Additional Tools section and follow the below steps: Pick & choose the Post PV Electric rate for either single meter or differently for multiple ...
How to add Storage in the PV design?
Rohit Maurya 4 months ago Updated FollowNot yet followed by anyone This is an optional step and you can add a Battery if you want to include Storage in your design. Please follow the below steps to add storage: Click on Storage from the Storage ...
How to add Inverters in a PV design
Rohit Maurya 4 months ago Updated FollowNot yet followed by anyone Inverters can easily be added in your design, please follow the below steps: Add Inverters from the Inverter section on the toolbar and proceed to edit its Properties Select the ...
How to Add Panels on a Roof
Rohit Maurya 4 months ago Updated FollowNot yet followed by anyone The below video will guide you to add panels on the roof: Steps to Add Panels on the roof: Click Fill Roof under Panel Layout section. Left click on the side of the roof to add ...
How to run Shade Simulation , Generate a Shade report and read its components.
Rohit Maurya 4 months ago Updated FollowNot yet followed by anyone Click “Shading” at the top of the design page at any time to run a shading analysis for any drawn PV array. Make sure all obstacles and trees are included to get an accurate shading ...
How to draw Trees around the roof
Rohit Maurya 4 months ago Updated FollowNot yet followed by anyone Tress are the most common obstacle which cast shadow on panels and impact solar generation. You can draw trees to analyze the impact of shading. Click on Spherical or Conical under ...
How can I draw Obstacles on the roof?
Rohit Maurya 4 months ago Updated FollowNot yet followed by anyone When designing a solar PV system, there are several potential obstacles and considerations on the roof that need to be taken into account to ensure a successful and efficient ...
What are Setbacks and why are they important?
Rohit Maurya 4 months ago Updated FollowNot yet followed by anyone Setbacks in the context of a roof refers to the distance between the edge or perimeter of the roof and certain features or obstacles. Setbacks can be made visible if you toggle on ...
Next page