How to Upload Image and Add Panels / Inverters / Storage

How to Upload Image and Add Panels / Inverters / Storage

You can upload an image by following these steps:

  1. Navigate to the Design Tool
  2. Click on the "Gear" Icon on the down right hand side of design page.
  3. Toggle to the "Change" option.
  4. A dialogue box will then pop up , select "Upload Image"
     & press confirm.
  5. Another dialogue will pop up asking to confirm if you want to change map , select "Yes" 
  6. Upload the required image.

Once the image is uploaded ,you will see the "Panel Array " tab activated, follow the below steps to Add Panels.
1. Navigate to the Panel Array on the right side of the screen & select the desired Panel make / Edit the number of Panels / Array tilt / Azimuth.
2. You can then create array groups , change azimuth , change the tilt etc if required.

To add Inverters , follow below steps:
1.Deselect Panel Array.
2.Select "Inverter"
3.Navigate to the Inverter details on the right hand side.
4.Select the desired make / capacity / number of inverters / Inverter groups.

To add Storage (battery) , follow below steps:
1. Deselect  Inverter.
2.Select "Storage"
3.Navigate to the Storage details on the right hand side.
4.Select the desired make / capacity / number of battries / reserve percentage.
5.You can also toggle off the Self Consumption to upload "Time based discharge" 






Here is a reference video:


    • Related Articles

    • How to add Inverters in a PV design

      Rohit Maurya 4 months ago Updated FollowNot yet followed by anyone Inverters can easily be added in your design, please follow the below steps: Add Inverters from the Inverter section on the toolbar and proceed to edit its Properties Select the ...

    • How to add Storage in the PV design?

      Rohit Maurya 4 months ago Updated FollowNot yet followed by anyone This is an optional step and you can add a Battery if you want to include Storage in your design. Please follow the below steps to add storage: Click on Storage from the Storage ...

    • How to Add Panels on a Roof

      Rohit Maurya 4 months ago Updated FollowNot yet followed by anyone The below video will guide you to add panels on the roof: Steps to Add Panels on the roof: Click Fill Roof under Panel Layout section. Left click on the side of the roof to add ...

    • How to Add Storage / Battery to an existing Solar Project

      To add Battery to an already created Solar Project on Enact Platform , follow below steps: Goto to Edit Quote Click Storage Navigate to the right hand side & click "Add Storage" Add the desired battery by selecting from the dropdown options. Post ...

    • Upload custom generation file

      Generation data for solar PV (photovoltaic) design refers to detailed information about the amount of electricity generated by a solar power system over a specific period. This data is crucial for evaluating the performance and efficiency of the ...