How to select & adjust the Post Solar Utility rate, Utility escalation & System Losses

 

Rohit Maurya

4 months ago Updated

FollowNot yet followed by anyone

Please click on Energy under the Additional Tools section and follow the below steps:

• Pick & choose the Post PV Electric rate for either single meter or differently for multiple meters
• Adjust Solar Allocation for multiple meters (if you have added more than one meter) or leave 100% for single meter
• Adjust Utility escalation (year on year)
• Select from the custom list of Monitoring system
• Adjust System Losses & Panel degradation (if required)
  
  

Recently viewed articles

• How to add Storage in the PV design?
• How to add Inverters in a PV design
• How to Add Panels on a Roof
• How to run Shade Simulation and generate a Shade report
• How to draw Trees around the roof

Related articles

• Step by Step Guide for Designing & Pricing a Solar PV System
• What are System Losses and why are they important?
• How to add Storage in the PV design?

Comments

0 comments

Article is closed for comments.

• Related Articles

• What are System Losses and why are they important?

  Rohit Maurya 4 months ago Updated FollowNot yet followed by anyone System losses are an important factor when estimating solar system generation. Typical Categories of Losses: Irradiance Based Losses: Tilt, Azimuth, Shading, Soiling, Snow Loads, ...

• Step by Step Guide for Designing & Pricing a Solar PV System (in Google Maps)

  Rohit Maurya 3 months ago Updated FollowNot yet followed by anyone Here is an overview of the design process in Google maps Steps for Designing & Pricing a Proposal Draw Roof Draw Obstacles Draw Trees Around the Roof Run Shade Simulation Add Panels ...

• Step by Step Guide for Designing & Pricing a Solar PV System

  Rohit Maurya 4 months ago Updated FollowNot yet followed by anyone Here is an overview of the Design process: Steps for Designing & Pricing a Proposal Draw Roof Draw Obstacles Draw Trees Around the Roof Run Shade Simulation Add Panels Inverter Sizing ...

• Can I manually adjust the pitch of the roof?

  Rohit Maurya 7 hours ago Updated FollowNot yet followed by anyone Yes, the Pitch of the roof can be manually adjusted. Steps to Manually Change the Roof Pitch Add Roof Outline: Outline all sides of the pitched roof. Switch to 3D View: Change to 3D ...

• Adjust Inter-row spacing in a design

  Inter-row spacing in solar design refers to the distance between rows of solar panels in a ground-mounted or roof-mounted system. Proper inter-row spacing is essential to avoid shading between rows, maximise energy production, and ensure efficient ...