How to place panels using Single Panel option

How to place panels using Single Panel option


To place panels using the Single Panel feature, follow these steps:
  1. Go to the Panel Layout section in your design workspace.
  2. Select the “Single Panel” option from the toolbar.
  3. Move your cursor over the roof area where you’d like to place a panel.
  4. As you hover, the panel will snap to nearby panels with similar properties for precise alignment.
  5. Panel Color Indicators will guide your placement:
    • Yellow Panel – Setback area or low-height obstruction
    • Red Panel – Unsuitable for panel placement
    • White Panel – Suitable for panel placement
    • ​
These visual cues help you make accurate and efficient layout decisions.

Here is a short reference video:
​

    • Related Articles

    • How to place panels using Single Panel option

      To place panels using the Single Panel feature, follow these steps: Go to the Panel Layout section in your design workspace. Select the “Single Panel” option from the toolbar. Move your cursor over the roof area where you’d like to place a panel. As ...

    • How do I delete Panel/s using Multiselect option to efficiently manage arrays?

      To delete a group of panels using Multiselect option , please follow below steps: 1. Navigate to the Design Tool. 2. Expand the Panel Layout tab. 3. Highlight / Activate the "Multiselect" option. 4. Navigate to the desired array & click and drag on ...

    • Applying Reverse Tilt to Solar Panels

      Summary This article explains how to use the Reverse Tilt to optimize panel placement on roofs with less ideal orientations. You will learn how to apply reverse tilt and adjust panels to prevent shading issues. Adding tilt to the solar panel To place ...

    • How do I delete Panel/s ?

      You can delete a single panel from Design Page by following these steps: Navigate to the design tool. Click on the Array from which you want to remove panel/s. Double click on the panel you want to remove. Confirmation of deletion will be then ...

    • Introducing Structures for Panels in Enact

      How to add Structures for Panels Add Panels on the Roof: Start by placing solar panels onto the desired rooftop area. Access Panel Properties: Click on "Show More" under the panel properties section. Add Frame Height: Enter the frame height to ...