Yes, the Pitch of the roof can be manually adjusted.
-
Add Roof Outline:
-
Outline all sides of the pitched roof.
-
-
Switch to 3D View:
-
Change to 3D mode and select one side of the roof at a time.
-
-
Activate Manual Pitch Adjustment.
- Slightly Change the Pitch Angle: Begin by making a slight adjustment to the pitch angle of the roof. This action will trigger the manual pitch adjustment mode.
- Drag to Adjust Tilte: Users need to drag one side of the roof to increase the tilt. This physical adjustment will activate the manual pitch field, allowing further customization
- Update Pitch Manually:
- Once the manual pitch field is activated, users can either continue adjusting the pitch by dragging in the 3D view or directly input the desired tilt angle for precise control. This ensures that the roof pitch is set accurately according to specific requirements.
- Adjust the Pitch: Either modify the pitch in the 3D drawing or directly input the desired tilt angle.Repeat the same steps for all sides of the pitched roof
Here is a video to help you change the pitch manually:
The pitch of a roof refers to its slope or angle, typically measured as the ratio of the vertical rise to the horizontal run. This can be expressed in degrees. Roof pitch is a critical factor in architectural design, impacting both the aesthetics and functionality of a building.
Importance of Correctly Adjusting the Roof Pitch in Solar Design
When designing a solar energy system, manually adjusting the pitch of the roof is essential. Solar panels are most effective when positioned at an angle that optimally captures sunlight. By manually adjusting the pitch, you can ensure that the roof slope is exact and the panels are designed accurately to receive maximum exposure to the sun throughout the day and across different seasons.
Comments
0 comments
Article is closed for comments.