Basic details of the Custom Hardware cannot be edited
Basic hardware details cannot be edited.Instead, users must duplicate the existing hardware or create new custom hardware. Below is a screenshot highlighting the basic details of any hardware in red
Duplicate Hardware:
- Click on "Additional Details" beside the hardware
- Scroll down and click "Duplicate Module/Inverter/Battery"
- Update all the details correctly and save
Related Articles
How to Edit Basic Info details for a Project
Post entering the project details in the requisite fields while creating the Project , you can add more info and add Basic details in the following way: Click on the Project Navigate to the Basic Info on the right hand side Click on the pencil Icon ...Can I edit the basic info?
Rohit Maurya 2 years ago Updated FollowNot yet followed by anyone Yes, you can edit the contact name and contact details by clicking the pencil on the right side of the page under Basic Info. However, you cannot edit project name, project type, ...Upload custom generation file
Generation data for solar PV (photovoltaic) design refers to detailed information about the amount of electricity generated by a solar power system over a specific period. This data is crucial for evaluating the performance and efficiency of the ...How can I create a custom Inverter?
You can create a custom Inverter in 2 ways , as follows : 1. For creating a new Inverter , go to the SETTINGS tab >> Click on the blue “CREATE CUSTOM INVERTER” button under INVERTER setup. A pop-up window will appear to fill all the mandatory fields. ...How can I create a custom Module?
Vince Bitz 2 years ago Updated FollowNot yet followed by anyone You can create a custom Module in 2 ways , as follows : 1. For creating a new Inverter , go to the SETTINGS tab >> Click on the blue “CREATE NEW MODULE” button under MODULE setup. A ...